Connect
Edgentik reviews the representative camera view, confirms Technical Fit and connects the agreed feeds.
Deploy Edgentik
Start with a Safety Control Scan.
Measure one visible safety condition in one operating area using the cameras already in place. Edgentik checks the camera views, establishes a baseline, shows where and when the condition keeps recurring, and measures the same condition again if the site takes action during the Scan.
No final camera plan is needed to start. A representative still or short recorded clip is enough for an initial camera-fit review.
How it works
From camera view to measured follow-up in four steps.
Measure
Establish the baseline and show where and when the condition keeps repeating.
Act
Your Safety or Operations team reviews the finding and decides what to change.
Measure again
If the site takes action during the Scan, measure the same condition again on comparable coverage and show what changed.
Timing
Two timelines, one bounded Scan.
Connection and setup
Edgentik confirms the camera and network fit, then schedules connection of the agreed views. Setup timing is confirmed separately for the site before measurement begins.
Safety Control Scan
Up to 8 weeks. The Scan may complete sooner when the baseline, review and included follow-up are complete.
If the site takes action after the Scan closes, follow-up can be scoped separately. At the end of the Scan, the site can expand, run another Scan or stop.
What you receive
A completed Safety Control Scan.
The Scan turns the measurement period into a concise operational record your Safety or Operations team can review.
Baseline
How often the condition was observed, with the measurement coverage made explicit.
Recurring pattern
Where and when the condition repeats, supported by reviewed evidence.
Follow-up
The site's recorded action and, when available, a comparable measurement showing what changed.
What is included
One condition. One operating area. Everything needed to run the measurement.
- Camera-fit review and commissioning
- On-site processing for the agreed scope
- Measurement for up to 8 weeks
- Evidence review and recurring-pattern analysis
- Completed Safety Control Scan
- One comparable follow-up measurement when the site acts during the Scan window
Some operating areas need more than one camera view. Technical Fit confirms whether the requested coverage fits the standard Scan before any commitment. There is no automatic ongoing commitment after the Scan.
Product boundaries
What Edgentik is not.
Not real-time collision avoidance
Edgentik measures recurring operating conditions. It is not an emergency intervention or machine-control system.
Not worker scoring
Edgentik measures what happens in an area, not who did it. It does not identify, rank or score individual workers.