Request fit check
Physical AI for Industrial Safety

See where and when risks repeat.

Use the cameras you have, or temporary coverage from Edgentik, to measure one safety condition. See the counts, the recurring pattern and the video behind it.

Find the risk. Verify the fix.Physical AI that turns what cameras see into measurements your team can act on.

Try the interactive spatial demo Watch the 82-second walkthrough

Also available: Watch Ask Edgentik answer questions from measured data ↗

  • Introductory C$800 · 4 weeks
  • Setup and Edge AI box included
  • 1 area · 1 condition
  • No obligation to continue

Associate Member, Manufacturing Safety Alliance of BC ↗

Introductory evaluation priceC$8004 weeks · 1 area · 1 condition
One area. One condition. Counts checked against your video.

Loaned edge appliance and setup included when using suitable existing cameras. Edgentik-supplied coverage quoted separately.

Request a fit checkFull offer & terms →
See Edgentik in action

See what the product actually shows.

Watch the recorded 82-second product walkthrough here. Then switch between camera and spatial views in the interactive example, or see Ask Edgentik answer questions from measured records.

Explore the spatial demoWatch Ask Edgentik ↗

The spatial history and follow-up comparison are illustrative. The walkthrough is a recorded product demonstration.

See a reviewed forklift-pedestrian finding.Open the sample Scan →Recorded footage with illustrative site action and follow-up, not a customer outcome.

Existing cameras connect to an on-site Edgentik Edge AI appliance.

Why Edgentik

Knowing something happened is not enough. Know how often it keeps happening.

Edgentik counts a defined, camera-visible condition, shows when and where it repeats, and keeps the evidence available for review. Rates are based on the time the camera could actually observe the area.

Recurring conditions cost time every time they come back.

The same crossing conflict returns. The same restricted area is entered again. The same PPE requirement keeps being missed.

You get a baseline and a written readout. Your team chooses what to change. Keep measuring afterwards to check whether the pattern improved.

Find the risk.Fix the condition.Verify the change.
The operating view

NOW. REPEATING. VERIFY.

See current conditions, find the pattern in usable observation time, then compare what happened after your team made a change.

01Current

See what needs attention now

Current observations and configured alerts with the time, condition and evidence to support review.

Illustrative alertPedestrian-vehicle interaction · Aisle BReview the evidence and decide how to respond
02Patterns

Find when the condition repeats

Counts and rates per usable camera-hour, by area and operating window.

Last 30 daysRecurring at Aisle B · Peak 13:00-15:00Focus review where the pattern concentrates
03After action

Check the change after action

Compare the same condition after the site acts, when observation windows are comparable.

Illustrative follow-upRoute change ready for reviewCompare the evidence. Decide whether to close or act again.
Explore the platformHow it works at the site
Choose a first condition

Restricted-area entry is a strong place to start.

Pick one measurable safety condition. Add other conditions only when the first one is useful and its camera view qualifies.

POLICY FAMILY

Forklifts near people

Recurring proximity in shared zones and crossings, where the camera view supports measurement.

Explore forklift safety policies POLICY FAMILY

Restricted-area entry

See which boundary is crossed, how often it happens and when entries repeat.

Explore area controls POLICY FAMILY

Missing visible PPE

Count visible exceptions for configured PPE requirements in defined work areas.

Review PPE visibility

Go beyond individual alerts. See when safety conditions repeat, persist or appear together over time. Explore forklift-pedestrian safety with existing cameras, restricted-area monitoring with existing cameras, or the broader policies and patterns workflow.

Have another visible condition? Show us a representative camera view and the operating question you want to understand. Discuss your condition →

Operations by discussion: forklift dwell at transfer points, area occupancy and recurring congestion. These require a fit review. Ask about your view →

Start with one area, one condition and a checked count. See the introductory C$800 evaluation →

Built for industrial deployment.

Use existing cameras with on-site processing and controlled evidence.

Built on more than 20 years of experience in embedded systems, industrial connectivity and applied AI. About Edgentik →

Review Security & Trust →
On-site processingContinuous video is analyzed locally on the Edgentik Edge AI appliance.
Controlled evidenceSelected evidence moves into review when it is needed.
Customer controlYour team decides what warrants attention and what action to take.
See Edgentik on a real safety question

Have one area in mind? Start with a quick fit check.

Introductory evaluation price: C$800 for four weeks. One condition, one area. Edge AI box and setup included. Edgentik-supplied cameras quoted separately. No obligation to continue.

Request a fit checkReview the evaluation terms